IWTT Series Wireless Temperature Sensor IWTTK200A
Industrial IoT Hardware
The IWTT Wireless Temperature Transducer is a cost effective replacement to a traditionally wired temperature transducer that offers the advantages of a low-cost installation in inaccessible and expensive installation environments.
It is easily paired to any of the range of IWR receivers - thus offering a “plug and play” solution to your pressure measurement applications.
Distributors Stock
Part #IWTTK200A
Need more information?
Contact us to request pricing, availability and customization options
Contact UsFeatures
- K or J Type Thermocouples
- PT100 RTD Sensors
- 6 mm stainless steel sheath
- Up to 500 m line-of-site range (depending on receiver)
- Five year battery life at 10 second transmission update rate
- Simple DIL switch pairing with the single or five channel receiver
- Single, five and multi-channel channel receivers available (up to 128)
- User-selectable transmission update rates
- Analog digital, RS-232/485, Ethernet & USB receiver outputs
- Receiver clean contacts provide process alarm functions
Specifications
Transmitter Temperature Ranges
System Performance
Material Specifications
Instrument Power Source
Receiver Output Signals
Environmental Conditions
Ordering Options
Standard products are factory configured as below:
| J-Type | 0°C to +1200°C |
| K-Type | 0°C to +1200°C |
| RTD Type | -200°C to +800°C |
| Accuracy (Non-linearity & Hysteresis) | <±0.1% /FS |
| Temperature Coefficent | ±500ppm/°C |
| Pressure Housing | 316 Stainless Steel |
| “O” Ring Seals | Viton |
| Wireless Enclosure Material | Acetal |
| Weight | 300g including battery |
| **Installation Position | Any |
| ** Consult installation manual to ensure adequate signal path between transmitter and receiver. | |
| Battery Type | User replaceable Lithium C cell |
| Battery Life | Five years at 10 second update rate |
| Battery Shelf Life | 10 years |
| Receiver Part Number | Outputs |
| IoT Gateway | Built-in cellular modem allows all data to be sent to remote servers |
| IWR-PORT | RS-232 or RS-485 or Ethernet MODBUS Communications. Up to 128 off analog 4-20 mA or Relay outputs can be obtained by fitting extra ISOSLICE I/O modules |
| IWR-USB | Displays & Logs data on any PC running IWRUSB software |
| IWR-5 | 5 off 4-20 mA or 1-5 V dc and 1 Relay output |
| IWR-1 | 1 off 4-20 mA and 1-5 V dc and 1 Relay output |
| ***Transmission Update Rate 1, 5, 10 and 30 seconds *** Consult installation manual for set-up: - Single channel system is DIL switch configurable - Five channel system requires set-up using “IWR Set” user software |
|
| Media Temperature | -200ºC to +1200ºC |
| Op./Ambient Temperature | -20ºC to +50ºC |
| Storage Temperature | -20ºC to +80ºC |
| Humidity | 5% to 95% RH non-condensing |
| Thermal Span Shift | <±0.05% /ºC typical |
| Pressure Transducer | See table below |
| Spare Battery | IBAT-1 |
| Receivers | See IoT Gateway, IWR-1, IWR-5, IWR-PORT and IWR-USB data sheets |
*Download free user configuration software here.
| Part No. | Description | Part No. | Description |
| IWTTP100A | PT100 6x100mm | IWTTJ200A | J type 6x200mm |
| IWTTP150A | PT100 6x150mm | IWTTJ300A | J type 6x300mm |
| IWTTP200A | PT100 6x200mm | IWTTJ400A | J type 6x400mm |
| IWTTP250A | PT100 6x250mm | IWTTK150A | K type 6x150mm |
| IWTTP300A | PT100 6x300mm | IIWTTK200A | K type 6x200mm |
| IWTTP400A | PT100 6x400mm | IWTTK300A | K type 6x300mm |
| IWTTK400A | K type 6x400mm | ||
| Part No. | Description |
| IWTT-Node-J | Temperature transmitter J-type wireless 2.4GHz |
| IWTT-Node-K | Temperature transmitter K-type wireless 2.4GHz |
| IWTT-Node-PT | Temperature transmitter PT100-type wireless 2.4GHz |